|
Hoisting & Rigging (2 day training program)
This module reviews OH&S regulation and the hazards associated with
rigging. Participants will learn to determine load weights and the
weights of common materials; safe working loads (SWL); wire safety
factors and the rule of thumb formulas for wire and fibre ropes; sling
angles and configurations; safe use of other rigging hardware (e.g.
pendant, pelican and other safety hooks, and different types of shackles
and slings and their applications); color code; container and half
height inspections; planning, assessment, inspection and maintenance
techniques of rigging hardware; slinging of drill-pipe, casing, drill
collars, proper loading of containers, half heights and proper
restraint used for offshore transport; different types of crane
configuration; factors affecting crane capacity; hand signals used
to safely move oilfield equipment including loading and back-loading of
supply boats; and Safety Do’s and Don’ts, while working around lifts
and heights.
Fall Protection & Scaffolding (2 day training program)
This module will review OH&S regulations pertaining to fall
protection: When to use fall protection and the different types of
fall protection (e.g. entering confined spaces, heights including
working in the derrick and working over the side); demonstration of
proper utilization of fall arrest systems and their components
(e.g. safety or inertia reels, safety lines, harnesses and lanyards);
and various types of scaffolding and safe erection and work loads.
Basic Firefighting (4 hours training program)
What is fire? This module will answer that question, in detail,
and will also review the causes and prevention of fires. Training
is provided in the utilization of various types of extinguishing agents
and extinguishers, and students learn about the composition and duties
of offshore fire teams, including preparation of a fire-drill program.
Confined Space Entry (2 day training program)
This module covers
OH&S regulation for confine space. The Student will learn the
knowledge and skills required to identify, plan and execute entry into a
confined space area, i.e. tanks, including P-tank, pre-load, spud,
ballast, pit, and crane columns. Students learn preparation of
work procedures and entry permits, atmospheric testing and proper (PPE)
personal protective equipment.
H2S Awareness (1 day training program)
This module introduces
students to H2S
properties, environments and safety procedures, to include: how to
properly protect yourself in the
H2S environment; deployment of self-contained breathing apparatus
(SCBA); use of multi-meter personal portable monitors for
detection; rescue techniques, and; analysis of hydrogen sulphide case
studies.
Forklift Operator (2 day training program)
This module will review the OH&S regulations for forklift.
Students will learn forklift theory, including potential hazards and
general safety rules, to include: re-fuel operations; lift trucks;
battery charging/recharging; pre-operational checks;
operational checks, and; practical hands-on competency training.
Standard First Aid & CPR (2 day training program)
This module will cover Standard First Aid and CPR (St. John Ambulance)
training, using basic theory and demonstration (plus hands-on training,
within student’s physical capacity), to include scenario analysis.
WHMIS or HAZMAT (4 hours training program)
This course covers the workplace Hazardous Materials. This system
will cover introduction and recognition of hazardous materials, labels,
MSDS (including responsibilities), worker education programs, personal
protective equipment, and terms & regulations.
Back to Programs and Start Dates
|
